Structure:
Trimming machines are usually made up of motors, knives, and adjustable protective covers
Use:
Is to use the knife head to board edge, according to the shape of the wood cutter edge into the corresponding shape,
Often used as a rectangular fillet into rounded edges, as well as the appropriate wood polishing operation. It is also widely used in construction beams,
Plate, column, wall reinforcement, decoration, wall installation, support, railings, billboards, air-conditioning outdoor units,
Installation of guide rails, satellite receivers, elevators, steel structures, plant buildings, etc..
Specifications：
The common trimming machine has the following specifications;
Rated voltage Rated Voltage (V~) 220
Rated frequency Rated Frequency (Hz) 50
Rated input power Rated Power lnput (W) 350
No load speed No-Load Speed (r/min) 30000
The maximum diameter of milling cutter is Max.Milling, Cutter, Diamerer (mm) phi 6
Rated voltage Rated Voltage (V~) 220
Rated frequency Rated Frequency (Hz) 50
Rated input power Rated Power Input (W) 350
No load speed No-Load Speed (r/min) 30000
The maximum diameter of milling cutter is Max.Milling Cutter Diameter (mm) 6.35
Net weight Net Weight (Kg) 1.5
Chuck diameter Disc diameter Phi 6mm (1/4)
Voltage Rated, voltage, 220V~
Frequency Frequency 50Hz
Input power Input power 400W
No load speed No, load, speed, 30000r/min
Weight Weight 1.7kg
Use：
Woodworking trimmer can save manpower and should be paid attention to when using:
1. Before use, should check whether the parts are normal, pay attention to daily recuperation.
2. When using, use the hand to grasp correctly, move evenly along the processing piece, the speed should not be too fast. The line should be operated beforehand so as not to damage the object.
3. After use, should be cut off the power supply, dust removal.
With regard to the use and maintenance of woodworking trimmer, you can continue to grope in practice, you can also refer to the product manual, or consult the inside craftsman.